BOMETOYS
Manta 10 X Lite 10inch FPV Drone BNF Long Range Heavy Payload Cinematic Drone Analog 5.8G VTX FPV Drone Kits
Choose options
Manta 10 X Lite 10inch FPV Drone BNF Long Range Heavy Payload Cinematic Drone Analog 5.8G VTX FPV Drone Kits
**We are a source manufacturer and welcome bulk purchases! We also accept deep customization services for one unit. If you have any needs, please contact us!
Product parameters:
Product name: Manta 10"X Lite
Structure: True X
Motor: AE3115 900KV
Flytower: Argus 65A+F722
Wheelbase: 440mm
Lower carbon plate: 3mm
Upper carbon plate: 2mm
Material: T700
Arm thickness: 7mm
Camera width: 20mm
Flytower hole spacing: M3*30.5mm
Image transmission hole spacing: M2*20/25.5.M3*30.5
Propeller size: Max 10.0 inch
Motor hole position: M3*16/19mm
Electrical layer height: 25mm
Payload: 2.5kg ~ 3kg
Flying Time: With Load Flying Time: 8-15min; No Load: 30min
Recommended battery: 8000mAh 6S
Flying Distance: 5-10km
Max Speed: 140km/h
Max Altitude: 6000m
Packaging: 1kg / 400*400*80mm
Frame: 10-inch Carbon
Structure: True X
Wheelbase: 440mm
Bottom Plate Thickness: 3mm
Top Plate Thickness: 2mm
Carbon Plate Material: T300/T700
Height of Electronic Device Layer: 25mm
Arm Thickness: 7mm
Camera Spacing: 20mm
Stack Mounting Hole: M3*30.5mm
VTX Mounting Hole: 1M2*20/25.5.M3*30.5mm
Propeller Installation Size: Max 10.0 inch
Motor Mounting Hole: 16mm16mm/19mm19mm
Top Plate Size: 21.6*5cm
Bottom Plate Size: 22.3*10.8cm
Motor: 3115 900KV
KV Value: 900KV
Operating Rated Voltage: 3-6S
No-load Current: 1.28A/ 12V
Phase Resistance: 38mΩ
Motor Weight: 112.3g
Maximum Current: 64.7A
Maximum Power: 1617 W
Maximum Thrust: 4185g
Motor Size: Ф37.1*32.1mm
Flight Control: F405
Size: 37×37mm
Mounting Holes: 30.5×30.5mm
9V: 9V regulated power supply output interface, max current 2A
5V：5V regulated power supply output interface, maximum current 3A
4.5V：Receiver power connector (USB power supply only)
CR: Current monitoring port
M1: camera reference pin (according to the flight control firmware version)
VI: Camera input port
VO: Graphic output interface
LED: RGB light strip interface
B-：Connect to the negative terminal of the buzzer, positive terminal connects to B+
RC: Receiver SmartPort interface
Rssi: Rssi signal input port
ESC: 60A-6S
Model: BLHeli_S 4IN160V1
Continuous Current: 60A
Burst Current: 70A (10s)
BEC: No
Current Sensor: Yes
Battery Cells: 2-6S
Weight: 21.5g
Size: 37*42.7mm
Mounting Hole Spacing: 30.5*30.5mm
Camera: B19 Product Manual Cam 1500TVL
Model: HD 1500TVL (upgraded version, with OSD tuning board)
Image Sensor: 1 / 3′CMOS
Pixels: 1500TVL
Lens: 2.1mm
Signal System: PAL / NTSC (adjustable via OSD)
Signal-to-Noise Ratio: ＞60Db（AGC OFF）
Electronic Shutter Speed: PAL: 1 / 50-100.000; NTSC: 1 / 60-100,000
Electronic Shutter: PAL: 1/50 - 100,000; NTSC: 1/60 - 100,000"
Automatic Gain Control (AGC: Low/Medium/High
Backlight Compensation (BLC): Yes
Minimum Illumination: 0.001Lux / 1.2F
WDR: D-WDR
DNR: 3DNR
Day/Night: Auto/Color/B&W
Power Supply: DC 5V-30V
Image transmission VTX: 5.8G 40CH 3W (Multiple options)
Supported Voltage: 7-28V
BEC: 5V / 500mA
Transmission Power: 25mW / 13.95dBm; 2500mW / 34.04dBm
Antenna Interface: MMCX
Output Power: PIT / 25 / 2500mW
Standard 40 Channels: A / B / E / F / R
Video Transmission Protocol: SmartAudio
Mounting Holes: 20X20.M2
Size: 25mmX37mmx6.5mm
Weight: 19g
Antenna: 5.8G RHCP 150MM
*The whole is made of imported PC+ABS material which can withstand high strength impact.
*Impact resistant double-sheathed semi-rigid cable.
*Root reinforcement design, 360 ° protection.
RX: ELRS 915MHz (Multiple options)
Processing Chip: ESP8285
RF Chip: SX1276IMLTRT
Power Input: 5V
Operating Current: 100mA
Operating Protocol: CSRF
Receiving Frequency Range: 915MHz or 868MHz
Size: 12mm12mm3mm
Weight: 0.6g (without antenna)
Antenna Connector: IPEX1
Telemetry Output Power: <17dBm
Firmware Update Method: WIFI
Propellers: Gemfan Prop 1050
Type: 1050
Blades: 3
Material: Fiberglass Nylon
Pitch: 5in
Center Hole lnner diameter: 5mm
Weight/g: 17g
Be aware:
*O3 or LINK VTX of the drone has been activated for better testing.
*If activation is not required, please note when placing an order.
Recommended Configuration:
Camera: Caddx Ratel
Antenna: 5.8G RHCP
RX: TBS / ELRS 2.4G / No RX
VTX: Analog 5.8G (1.6w or 2.5w) / Analog 1.2G / Link HD / DJI O3
FC: Axisflying Argus ECO F405
ESC: Axisflying Argus 60A 8bit
MOTOR: Axisflying 3115 900kv
Props: GemFan 1050
Performance:
Payload：2.28 kg
Take off weight：3.8 kg
Note: Batteries and transmitters are not included in the package
SHIPPING & DELIVERY
We ship worldwide. Available shipping methods, delivery times, and shipping costs vary by destination, product weight, package size, and shipping method.
ORDER PROCESSING
Most orders are processed within 1–3 business days after payment is confirmed. Special-order or made-to-order products may require additional processing time.
DELIVERY TIME
Estimated delivery time includes processing and transit time. Delivery times are estimates and may vary due to customs clearance, weather, holidays, carrier delays, or other circumstances beyond our control.
Available shipping options and estimated delivery times are shown at checkout.
SHIPPING OPTIONS
Depending on the product and destination, Standard Delivery and Express Delivery options may be available.
Large, heavy, oversized, remote-area, and island shipments may have different shipping options, delivery times, or additional charges.
CUSTOMS, DUTIES & TAXES
Depending on the destination, international orders may be subject to customs duties, import taxes, VAT, or other local charges.
Any applicable charges not included or collected at checkout may be the customer's responsibility.
TRACKING
Once your order ships, you will receive a shipping confirmation email with tracking information.
One order may be shipped in multiple packages, in which case multiple tracking numbers may be provided.
PAYMENT METHODS
We accept major credit and debit cards, including Visa, Mastercard, American Express, and Discover.
We also accept PayPal, Apple Pay, Google Pay, and selected Buy Now, Pay Later services such as Afterpay or Zip or klarna, where available.
Payment methods and installment options may vary by country, device, and order amount.
PAYMENT SECURITY
Payments are securely processed through our payment providers. BOMETOYS does not have access to your complete credit card number or security code.
ORDER CANCELLATION & REFUNDS
Please contact us as soon as possible if you need to cancel an order. Orders that have entered the fulfillment or shipping process may no longer be cancellable.
Approved refunds are issued to the original payment method and may take approximately 7–10 business days to appear, depending on your bank or payment provider.
For full details, please see our Return & Refund Policy.
NEED HELP?
If you have questions about shipping or payment, please contact us at support@bometoys.com
WHY SHOP WITH BOME TOYS
CAREFULLY SELECTED PRODUCTS
We offer a carefully selected range of drones, FPV systems, RC vehicles and aircraft from trusted brands and experienced manufacturers.
RELIABLE GLOBAL SHIPPING
We work with established international shipping carriers to provide reliable delivery options for customers worldwide.
30-DAY RETURNS
Eligible orders can be returned within 30 days in accordance with our return policy.
EXPERT PRODUCT SUPPORT
Need help choosing a product, setting up your equipment or finding the right accessory? Our support team is here to help.
SPARE PARTS & AFTER-SALES SUPPORT
We provide support for spare parts, replacement components and accessories to help you keep your equipment running.
EASY ORDER TRACKING
Once your order ships, we'll send you tracking information so you can follow your package from dispatch to delivery. You can also track at Our order tracking page.
