CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR

CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR

The CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR is a fully assembled 1/10 scale 6WD Unimog-style RC crawler designed for scale trail driving and technical off-road terrain. Its six-wheel-drive layout combines three portal axles, a two-speed transmission, selectable differential locks and 120 mm MUD CRAWLER tires. A PC front body, ABS rear cargo bed and integrated lighting complete its utility-truck design.

Key Features:

6WD Three-Axle Drivetrain

The CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR uses a 6x6 drivetrain with three reinforced portal axles. Its 5.2 cm ground clearance helps the chassis negotiate uneven trail surfaces. The front and rear axle groups have independently controlled differential-lock functions, allowing the driver to adjust traction for changing terrain.

Two-Speed Transmission and Transfer Case

The two-speed transmission provides a low gear for controlled crawling and a higher gear for faster trail sections. The integrated transmission and transfer-case layout supports the vehicle’s low-center-of-gravity chassis design.

Reinforced Axles and Drivetrain

The axle assemblies use steel differential gears, enhanced CVD driveshafts and protected differential-lock cables. A CNC motor base, powder-metallurgy alloy gears and precision-cut transmission gears support consistent power transfer. ABEC3 rubber-sealed bearings help keep dirt out of the drivetrain during off-road use.

Multi-Link Suspension and CNC Shocks

The solid-axle suspension uses steel links and a front Panhard rod. CNC-machined metal shock absorbers with tuned springs help the axles follow uneven ground while maintaining a stable chassis position.

Scale Unimog Body and Cargo Bed

The front body uses a PC shell, paired with a rigid ABS rear cargo bed measuring 42 × 20 × 3.5 cm. This two-part body design gives the CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR its detailed utility-truck profile.

Integrated Lighting and Off-Road Wheels

Lighting is included in the standard configuration. Lightweight 1.9-inch nylon beadlock wheels are paired with 12 × 4.5 cm MUD CRAWLER tires for scale trail driving over loose soil, rocks and mud.

Motor Upgrade Compatibility

The stock configuration uses a 540 35T brushed motor. The motor mount is also compatible with 540, 550 and 560-size motors and Hobbywing AXE brushless systems. Confirm complete power-system compatibility before installing an upgrade.

Specifications:

Spec	Detail
Brand	CROSSRC
Model	EMO NT6
Vehicle Type	Unimog-style 6x6 RC crawler
Scale	1/10
Condition	New assembled and painted
Drive System	6WD 6x6
Body Color	Grey
Body Material	PC front body with ABS rear cargo bed
Axles	Three reinforced portal axles
Differential Function	Selectable locking functions for the front and rear axle groups
Transmission	Two-speed transmission with transfer case
Suspension	Solid axles with multi-link suspension and front Panhard rod
Shock Absorbers	CNC-machined metal shocks with tuned springs
Motor	540 35T brushed
ESC	1060 60A
Steering Servo	15 kg
Shift Servo	3 kg
Radio System	Dumbo 2.4 GHz four-channel transmitter and receiver
Lighting	Included
Battery Compatibility	2S or 3S LiPo
Battery Connector	XT60
Optional Battery	11.1V 50C 5200mAh 3S LiPo
Maximum Speed	Up to 25 km/h as listed
Ground Clearance	5.2 cm
Wheelbase	31.7 cm + 13.6 cm (45.3 cm total)
Vehicle Dimensions	65.6 × 25.2 × 28.4 cm
Vehicle Weight	5.35 kg
Tire Size	12 × 4.5 cm
Wheels	1.9-inch lightweight nylon beadlock wheels
Battery Compartment	15 × 5 × 4 cm
Cargo Bed Dimensions	42 × 20 × 3.5 cm
Driveshaft Material	Nylon

Battery and Charger Options:

Select the Battery+Chargers option that matches your setup:

• Not included: Battery and charger are not included.
• Included: Includes one XT60 11.1V 50C 3S 5200mAh LiPo battery and one SKYRC MAX B6AC 80W balance charger.

SKYRC MAX B6AC 80W Balance Battery Charger  (optional)

The transmitter requires AA batteries, which are sold separately.

Package Contents:

• Assembled and painted CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR
• 540 35T brushed motor
• 1060 60A ESC
• Steering and shift servos
• 2.4 GHz transmitter and receiver
• Integrated lighting
• ABS rear cargo bed
• 1.9-inch nylon beadlock wheels with MUD CRAWLER tires

Battery and charger are included only with the Included option. Transmitter AA batteries are sold separately. The sound system is not included.

Frequently Asked Questions:

Is the CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR ready to run?

The vehicle arrives assembled and painted with its motor, ESC, servos, lighting, transmitter and receiver. A compatible battery and charger are required unless the Included option is selected. Transmitter AA batteries are sold separately.

What battery does the CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR use?

The vehicle supports 2S or 3S LiPo batteries and uses an XT60 connector. The optional battery configuration is an 11.1V 50C 5200mAh 3S LiPo.

Can the front and rear differential locks be controlled separately?

Yes. The front and rear axle groups have independently controlled differential-lock functions, so traction can be adjusted for different trail conditions.

Does the CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR have more than one speed?

Yes. Its two-speed transmission provides a lower gear for controlled crawling and a higher gear for faster trail driving.

Is lighting included?

Yes. Lighting is included in the standard CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR configuration.

Can I upgrade the motor?

The stock motor is a 540 35T brushed unit. The motor mount also supports compatible 540, 550 and 560-size motors and Hobbywing AXE brushless systems. Confirm full system compatibility before installation.

Does BOMETOYS provide replacement parts for the CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR?

BOMETOYS provides full parts support for the CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR. Send us a photo of the part and its part number, and we will help match the correct replacement.

Explore compatible bumpers, roof racks, chassis armor, rear cargo beds and cargo canopies for the CROSSRC EMO NT6 Simulation Unimog 6WD 6x6 1/10 RC Car Off-Road Crawler Vehicle RTR:

CROSSRC NT6 1/10 6x6 RC Truck Accessories - Front Bumper, Roof Rack, Chassis Armor, Rear Camper Box & Cargo Canopy (Click to get)

CROSSRC EMO NT6 uses an independently installed PC material soft-shell front and high-quality ABS (420mm*200mm*35mm) flat-bottomed hard tail box to provide players with super material transportation capabilities.

CROSSRC EMO NT6 1:10 refers to the layout of a real hard-core off-road vehicle, with a front-mounted integrated engine gearbox assembly (motor gearbox integrated), a mid-mounted proportional output transfer case, and the third axle adopts a 6x6 high-intensity climbing Over-bridge transmission bracket connection.

The CROSSRC EMO NT6 gearbox uses a CNC process motor base, a combination of PM process high-strength alloy gears and precision cutting gears, which greatly improves the anti-wear and silent performance of the gearbox assembly.

CROSSRC EMO NT6 equipped Three sets of portal axles made of reinforced materials, equipped with the latest version of enhanced CVD, steel metallurgical gear differential, self-lubricating differential lock wire protection sleeve, equipped with open tooth differential lock, original car The full-rudder differential lock control system with independent front and rear controls enables both the front and rear axle groups to realize the differential locking function of opening and locking in seconds.

The entire CROSSRC EMO NT6 vehicle uses ABEC3 rubber cap bearings as standard equipment, which can effectively extend the maintenance cycle of the vehicle when used in off-road climbing, and provide sufficient guarantee for smooth transmission of the vehicle.

The original car comes standard with 1.9-inch lightweight nylon clip-on wheels and 120mm MUD CRAWLER mud-terrain tires set for off-road mountain roads, giving the NT6 excellent escape performance.

All-metal CNC precision-machined shock absorbers, combined with specially adjusted springs, provide support while providing the most flexible axle posture.