Specification:
Brand Name: RadioMaster
Item Name: TX16S Mark II Radio Controller
Color: Black
Version: 4-IN-1/ELRS
Gimbal: V4.0 Hall
Size: 287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)； Option 2: Internal ELRS (SX1280)
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
Antenna gain: 2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 22dbm
Radio firmware: EdgeTX
Module Firmware: Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS)
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor
Module Bay: JR compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade
Battery: TX16S dedicated lithium battery 7.4V 5000mah 37WH (optional)
Bullet Point:
*Improved internal circuity and optimized power supply.
*New charge circuitry with integrated reverse-polarity protection.
*Optimized charge IC now allows up to 2.2A internal USB-C charge current.
*Rear mounted audio jack provided headphone output.
*V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
*Optional high/low rear grips included for improved ergonomics.
*Improved S1/S2 knobs with clear centre-detents.
*Improved LS/RS Sliders with smoother feel and better centre-detents.
*Redesigned battery cover for improved battery access.
*Retooled body shell with improved fit and finish.
*Trainer socket changed to standard TRS 3.5mm socket.
*Rear DIY Socket added for personalised mods.
*Improved internal plastics for better longevity.
*Available ELRS and 4in1 versions.
Features:
--Support EdgeTX and OpenTX
--EdgeTX is installed by default (Touch screen enabled).
-- Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.
--ELRS versions by default
V4.0 HALL GIMBALS:
-- Standard version with V4.0 Hall Gimbals, same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.
Flat & Raised Grips Included:
--Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.
--Built-in dual speakers
External Module Bay:
-- The TX16s natively supports Team Black Sheeps MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfires via software, no more module swapping.
--Easy Firmware Updates
Upgraded Design:
-- Retooled faceplate with improved fit and finish
-- Improved S1/S2 knobs with center detents
-- 4.3” IPS Color Display - The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.
-- Improved LS/RS Sliders with smoother feel and better centre-detents.
-- New 3.5mm Audio jack - Rear mounted audio jack minimizes RF interference from external modules and adds headphone audio feature.
-- Redesigned battery cover, easier to remove.
-- Rear DIY Socket added for personalised mods.
Package Includes:
1 x TX16S Mark II Radio Controller (Optional Version)
1 x 7.4V 5000mah 37WH Battery(optional)
1 x 18650 Tray
1 x USB-C Cable
1 x Screen Protector
1 x pair of flat grips
1 x pair of raised grips
1 x TX16S Key Chain
RadioMaster 2S 7.4V 5000mah 37wh RadioMaster TX16s Remote Control Transmitter JST-XH and XT30 Plug Large Endurance Li-ion Battery
Product parameters:
Battery capacity: 5000mAh 37wh
Battery voltage: 7.4v
Number of cells: 2 x 21700 Li ion 3.7V 18.5wh
Plug type: jst-xh and xt30
Weight: 150g
Dimensions: 72mm x 42mm x 22mm
It can supply power for tx16s remote controller
Note: please use no more than 2A to charge the battery
